High-Speed Roll-Up Doors for Food Processing Industry of SpeedRoll SDF Series

High-Speed Roll-Up Doors for Food Processing Industry of SpeedRoll SDF Series

Application

Warehouse areas. Premises with high hygiene standards

Advantages

1
2

Design

ASIS 304 stainless steel door frame
ASIS 304 stainless steel door frame
RAL 9010 Pure white
RAL 9010 Pure white
RAL 5002 Ultramarine blue
RAL 5002 Ultramarine blue
RAL 6026 Opal green
RAL 6026 Opal green
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 1003 Signal yellow
RAL 1003 Signal yellow
RAL 3002 Carmine red
RAL 3002 Carmine red
RAL 2004 Pure orange
RAL 2004 Pure orange

Construct and sizes

Construction
  • 1. Electric drive
  • 2. Shaft
  • 3. Shaft box
  • 4. Door curtain
  • 5. Transparent insert (window/panel)
  • 6. Vertical track
  • 7. Guide
  • 8. Curtain bottom edge
  • 9. Photoelectric cell
  • 10. Control unit
Parameters Value
Opening width, mm from 1 700 to 3 800
Opening height, mm from 1 700 to 4 000
Headroom, mm from 550
Sideroom clearance, mm from 175 to 400

Mounting

Checking Dimensional Details
  • All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points:
  • H — opening height (distance from floor to opening top);
  • W – opening width (distance between left and right side of the opening).

When measuring Н and W the largest figure is taken for final dimension.

Overhead mounting Overhead mounting
General view of a door with side drive (drive on the left/drive on the right) General view of a door with side drive (drive on the left/drive on the right)
Symbol, parameter name Calculation formula
H, mm Opening height from 1 700 to 3 800
B, mm Opening width from 1 700 to 4 000

Complectations

Tracks and track covers made of AISI304 stainless steel
Tracks and track covers made of AISI304 stainless steel
Zinc-caoated shaft, diameter 90/130 mm
Zinc-caoated shaft, diameter 90/130 mm
Guide rails — extruded polyethylene
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Photocells are installed at 500 mm above the floor level. Anti-jamming sensor — at the top of side track to detect incorrect unwinding of the curtain
Photocells are installed at 500 mm above the floor level. Anti-jamming sensor — at the top of side track to detect incorrect unwinding of the curtain
Shaft made of AISI304 stainless steel
Shaft made of AISI304 stainless steel
Control unit body made of AISI304 stainless steel
Control unit body made of AISI304 stainless steel
Heating of the drive and tracks
Heating of the drive and tracks
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automaticaly with a counterweight
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automaticaly with a counterweight

Extra information

  • Carry out regular maintenance of high-speed doors to provide their smooth and safe operation.
  • Manual closing and opening of the doors is carried out with a hand crank.
  • Don’t strike the door curtain or obstruct its movement.
  • Keep the rails clean.
  • Never stay or cross an opening under a moving door curtain as it may cause serious injury.
  • Keep the door opening clear of any objects during door closing or opening.
Packing in wood Packaging features
Contents wooden crate, door parts are protected with cardboard and fixed with clamps
Length, mm depends on door parts length
Width, mm from 640 to 705
Height, mm from 480 to 730
DoorHan warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.

New Products

DoorHan drive (220/380 V)

Other customers also looked at

Navigation