FT-Series Vertical Storing Dock Leveler (Stationary, Sliding)

Stationary and sliding vertical storing dock levelers provide a smooth transition between the warehouse floor and the trailer bed bridging differences in height of up to 360 mm. These dock levelers are designed for trailers having approximately the same height difference from the ramp level. The structure is welded directly onto a steel profile that is mounted on the edge of the dock. The rail is used to allow the platform to slide to serve several loading points.
FT-Series Vertical Storing Dock Leveler (Stationary, Sliding)

Application

Warehouse areas

Advantages

1
2

Design

Diamond plate
Diamond plate
RAL 9005 Jet black
RAL 9005 Jet black
RAL 5005 Signal blue
RAL 5005 Signal blue

Construct and sizes

Construction
  • 1. Deck (on the other side)
  • 2. Lock holding the deck in vertical position
  • 3. Lip
  • 4. Platform
  • 5. Signal black and yellow stripes
  • 6. Spring
  • 7. Balancing mechanism
  • 8. Mounting plate
Parameters Value
Width, mm 1 200; 1 500; 1 800; 2 000
Length, mm 1 000; 1 500
Operating range depending on leveler length, mm upward 120–180, downward 120–180
Thickness of upper sheet, mm 5

Mounting

  • When measuring Н and В the largest figure is taken for final dimension. When measuring h the smallest figure is taken for final dimension.
Dock leveler both stationary and sliding, is installed on a specially prepared dock edge. Dock leveler both stationary and sliding, is installed on a specially prepared dock edge.
Sliding vertical storing dock leveler Sliding vertical storing dock leveler
Symbol, parameter name Calculation formula
H, mm Length 1 000; 1 500
B, mm Width 1 000; 1 500; 1 800; 2 000
h, mm Lip width 210
b1, mm Operating range, upward 120–180
b2, mm Operating range, downward 120–180
Stationary vertical storing dock leveler Stationary vertical storing dock leveler
Symbol, parameter name Calculation formula
H, mm Length 1 000; 1 500
B, mm Width 1 000; 1 500; 1 800; 2 000
h, mm Lip width 210
b1, mm Operating range, upward 120–180
b2, mm Operating range, downward 120–180

Complectations

Sliding vertical storing dock leveler
Sliding vertical storing dock leveler
Stationary vertical storing dock leveler
Stationary vertical storing dock leveler
Bended (at 45°) wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.
Bended (at 45°) wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Extra information

  • Attention! Stationary and sliding levelers can only be used with pallet trucks and standard four-wheel lift trucks with inflatable wheels.
  • Conduct routine inspections and maintenance of the dock leveler to ensure its safe and smooth operation.
  • Use special leveler to raise or lower the dock leveler.
  • Do not strike the leveler surface with heavy objects and never obstruct free movement of the leveler lip.
  • Keep the sliding rail, rollers, pins and bushings of the dock leveler clean and free of objects and spills that could become trip hazards.
  • Never stand under the leveler being lifted to prevent serious injury.
  • Ensure there are no objects under the leveler when lowering it.
Packing in wood Packaging features
Contents bubble wrap, polystyrene, wooden pallet, wooden bar
Length, mm depends on leveler length
Width, mm depends on leveler width
Height, mm depends on leveler height
DoorHan warrants the vertical storing dock levelers to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

New Products

Advanced balancing system guarantees easier operation control.
New galvanized steel rail for vertical storing dock levelers.

Other customers also looked at

Navigation