Free-Standing Frame of FEH, FET Series

If floor space is limited, a free standing frame assembly can support the installation of a dock leveler outside a building. Such frames are ideal for warehouses and distribution centers where the entire building space is used or trailers can’t be parked perpendicular to the building.
Free-Standing Frame of FEH, FET Series

Application

Warehouse area

Advantages

1
2

Design

Diamond plate
Diamond plate
RAL 9005 Jet black
RAL 9005 Jet black
RAL 5005 Signal blue
RAL 5005 Signal blue

Construct and sizes

Construction
  • 1. Left base
  • 2. Right base
  • 3. Front support beam
  • 4. Rear support beam
  • 5. Central support beam
  • 6. Left leg
  • 7. Right leg
Parameters Value
Width, mm 2 800–3 600
Height, mm 800–1 400
Length, mm 2 030–7 648

Mounting

Mounting on steel embedded plates. This is a preferable type of installation including embedment of steel plates (400 х 400 mm) in particular places of a concrete base during preparation of installation site for a dock house. Mounting on steel embedded plates. This is a preferable type of installation including embedment of steel plates (400 х 400 mm) in particular places of a concrete base during preparation of installation site for a dock house.
Mounting on concrete base (with anchor bolts). This type of installation is used when steel plates were not embedded during concrete base pouring. Mounting on concrete base (with anchor bolts). This type of installation is used when steel plates were not embedded during concrete base pouring.
Straight free-standing frame (90°) for a mechanical leveler and an embedded type dock leveler with hinged lip Straight free-standing frame (90°) for a mechanical leveler and an embedded type dock leveler with hinged lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 90
Straight free-standing frame (90°) for an embedded type dock leveler with telescopic lip Straight free-standing frame (90°) for an embedded type dock leveler with telescopic lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 90
Angled free-standing frame (60°) for a mechanical leveler and an embedded type dock leveler with hinged lip Angled free-standing frame (60°) for a mechanical leveler and an embedded type dock leveler with hinged lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 60 (turned to the right or to the left)
Angled free-standing frame (45°) for a mechanical leveler and an embedded type dock leveler with hinged lip Angled free-standing frame (45°) for a mechanical leveler and an embedded type dock leveler with hinged lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 30 (turned to the right or to the left)
FEH 30 series angled free-standing frame (30°) for a mechanical leveler and an embedded type dock leveler with hinged lip FEH 30 series angled free-standing frame (30°) for a mechanical leveler and an embedded type dock leveler with hinged lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 30
FET 45 series angled free-standing frame (45°) for an embedded type dock leveler with telescopic lip FET 45 series angled free-standing frame (45°) for an embedded type dock leveler with telescopic lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Hh, mm Leveler height any
Lh, mm Leveler length (overall) any
A°, Angle 45
FET 60 series angled free-standing frame (60°) for an embedded type dock leveler with telescopic lip FET 60 series angled free-standing frame (60°) for an embedded type dock leveler with telescopic lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 60
FET 30 series angled free-standing frame (30°) for an embedded type dock leveler with telescopic lip FET 30 series angled free-standing frame (30°) for an embedded type dock leveler with telescopic lip
Symbol, parameter name Calculation formula
B, mm Width 2 800–3 600
Hf, mm Ramp height 900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall) any
Bh, mm Leveler width (overall) any
Hh, mm Leveler height any
A°, Angle 30

Complectations

Wheel guides
Wheel guides
Shock column
Shock column
Molded rubber bumpers 250х250х100 mm. Standard. Product number BR250x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 250х250х100 mm. Standard. Product number BR250x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 450x250x100 mm. Standard. Product number BR450x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 450x250x100 mm. Standard. Product number BR450x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 510х250х330 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRC510х250х330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 510х250х330 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRC510х250х330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 610х250х175 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRM610х250х175. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 610х250х175 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRM610х250х175. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 600х364х110 mm (external dimensions), moving. Based on rubber bumper 450x250x100 mm. Product number BRM600х364х110.  Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 600х364х110 mm (external dimensions), moving. Based on rubber bumper 450x250x100 mm. Product number BRM600х364х110. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 465х250х165 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(16)465х250х165S. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 465х250х165 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(16)465х250х165S. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 460х250х160 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(10)460х250х160. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 460х250х160 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(10)460х250х160. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 500х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS500х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 500х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS500х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 800х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS800х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.
Molded rubber bumpers 800х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS800х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Extra information

  • Carry out technical inspection and maintenance of the frame regularly to provide its safe and smooth operation.
  • In winter remove excess snow buildup from on top of the frame and dock leveler. Clean the surrounding territory of the warehouse to ensure correct positioning of trailers.
  • Speed of a parking trailer should be minimum, not more than 1 km/h (30 sm/sec).
  • Do not drive over the frame bases with forklifts and other lifting equipment. Drive only on the leveler deck and frame triangle.
  • Attention! Check bumpers for signs of wear and tear regularly. Should bumper residual thickness comprise less than 50 mm or there is no bumper material at all stop using the frame until new bumper material is installed.
Packing in cardboard Packaging features
Length, mm base (depends on leveler length) — 2 000–4 500; legs — 2 800–3 600; triangles — 2 800–3 600
Width, mm base — 785 (max); legs — 300; triangles — 3 400
Height, mm base — 800 (max); legs — 550 (max); triangles — 200
Contents bases, legs, triangles, a box with hardware
DoorHan warrants the frame to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Other customers also looked at

Navigation