Dock Plate of MT Series

MT-series dock plates are used when goods traffic is low and there is no need to install a standard loading dock. These plates are designed for trailers having approximately the same height above the ramp level. They easily bridge the gap between dock floor and truck bed compensating height difference of up to 240 mm. The plates can be transported to the required place with a forklift. All dock plates are manufactured and tested in compliance with DIN EN1398 directive and have a corresponding Certificate of Compliance.
Dock Plate of MT Series


Diamond plate
Diamond plate
RAL 9005 Jet black
RAL 9005 Jet black
RAL 5005 Signal blue
RAL 5005 Signal blue

Construct and sizes

  • 1. Plate
  • 2. Hinged lip
  • 3. Stationary lip
  • 4. Guides for forklift forks
Parameters Value
Length, mm 2 000
Width, mm 1 800; 2 000

Extra information

  • Attention! Portable dock plates can only be used with pallet trucks and standard four-wheel lift trucks with inflatable wheels.
  • Conduct routine inspections and maintenance of the dock plate to ensure its safe and smooth operation.
  • Do not strike the plate surface with heavy objects and never obstruct free movement of the plate lip.
  • Never stand under the plate during its lowering to prevent serious injury.
  • Ensure there are no objects under the plate when lowering it.
DoorHan warrants the plate to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Other customers also looked at