Mobile Yard Ramp without Truck Bed Support of RMFS series

Mobile yard ramps are specifically designed to provide ground to dock ramp access to high dock warehouses or trailer beds. They do not require special preparation to operate allowing for loading/unloading operations to be performed without construction of a traditional concrete ramp. All DoorHan ramps have a similar principle of operation, i.e. a ramp is lifted by a mechanical or hydraulic drive, equipped with safety system, and is easily transported to the warehouse dock or the trailer with a fork lift. If a ramp has legs then it is set on them, if the trailer bed is used as a support for the ramp then it is lowered onto it. After the loading/unloading operations have been completed the ramp is raised and transported to the place of storage.
Mobile Yard Ramp without Truck Bed Support of RMFS series

Application

Warehouses and logistics centres

Advantages

1
2

Design

RAL 5005 Signal blue
RAL 5005 Signal blue
RAL 9005 Jet black
RAL 9005 Jet black

Construct and sizes

Construction
  • 1. Ramp track decking
  • 2. Bottom hinged lip
  • 3. Top hinged lip
  • 4. Adjustable leg
  • 5. Wheel
Parameters Value
Length, mm 12 375
Width, mm 2 200
Ramp track width, mm 1 900

Mounting

Mobile Yard Ramp without Truck Bed Support Mobile Yard Ramp without Truck Bed Support
Symbol, parameter name Calculation formula
H, mm Length 12 375
B, mm Width 2 200
b1, mm Operating range, upward 1 500
b2, mm Operating range, downward 1 100

Complectations

Mobile yard ramp without truck bed support
Mobile yard ramp without truck bed support

Extra information

  • Don’t operate the ramp until its working zone is clear of people and goods.
  • Do not drive fork lift on the ramp unless the lip is securely on the truck bed and has a minimum of 250 mm overlap on its surface.
  • Don’t overload the ramp. The permissible load corresponds to the total weight of the fork lift with the load and the driver.
  • Don’t lift the mobile ramp with goods lying on it.
  • After the loading/unloading operations have been completed put the ramp into the stored position.
  • Don’t turn off the power from control unit during the whole loading/unloading cycle (for mobile ramps with hydraulic drive).
  • Don’t exceed the fork lift speed (not more than 5 km/hour).
  • Don’t drive the fork lift on the ramp until you are sure the lip is securely on the truck bed (for mobile ramps with hydraulic drive).
  • Make sure the WORK button is pressed, and the power switch of the control unit is ON during the whole loading/unloading cycle. Otherwise the hydraulic pump may be damaged (for mobile ramps with hydraulic drive).
  • Prior to operation take off the shipping fasteners. Attention! During loading/unloading operation the ramp with hydraulic drive and ramp with support on the trailer bed automatically follows the trailer bed height fluctuation. The ramp without support on the trailer bed has a lip which follows the truck bed movement (maximum deviation from the horizon is ±100 mm).
  • DoorHan mobile yard ramps can only be used with fork lifts having inflatable wheels. Don’t drive hydraulic trolleys and loaders with polyurethane wheels having high point load onto the ramp.
DoorHan warrants the mobile yard ramp without truck bed support to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Other customers also looked at

Navigation