High-Speed Roll-Up Doors for Indoor Applications of SpeedRoll SDI series

High-Speed Roll-Up Doors for Indoor Applying of SpeedRoll SDI series

Application

Warehouse areas. Industrial facilities

Advantages

1
2

Design

Doors frame – zinc-coated steel, unpainted
Doors frame – zinc-coated steel, unpainted
Doors frame – ASIS 304 stainless steel
Doors frame – ASIS 304 stainless steel
RAL 9010 Pure white
RAL 9010 Pure white
RAL 5002 Ultramarine blue
RAL 5002 Ultramarine blue
RAL 6026 Opal green
RAL 6026 Opal green
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 1003 Signal yellow
RAL 1003 Signal yellow
RAL 3002  Carmine red
RAL 3002 Carmine red
RAL 2004  Pure orange
RAL 2004 Pure orange

Construct and sizes

Construction
  • 1. Electric drive
  • 2. Shaft
  • 3. Shaft box
  • 4. Door curtain
  • 5. Transparent insert (window/panel)
  • 6. Vertical track
  • 7. Guide
  • 8. Curtain bottom edge
  • 9. Photoelectric cell
  • 10. Control unit
  • 11. Counterbalance
Parameters Value
Opening width, mm from 2 000 to 5 700
Opening height, mm from 1 800 to 5 800
Headroom, mm from 600
Sideroom clearance, mm from 225 to 475

Mounting

Checking Dimensional Details
  • All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points:
  • H — opening height (distance from floor to opening top);
  • W – opening width (distance between left and right side of the opening).

When measuring Н and W the largest figure is taken for final dimension.

Overhead mounting Overhead mounting
Side drive (with counterbalance/without counterbalance) Side drive (with counterbalance/without counterbalance)
Symbol, parameter name Calculation formula
H, mm Opening height from 1 800 to 5 800
B, mm Opening width from 2 000 to 5 700
Front drive (with counterbalance/without counterbalance) Front drive (with counterbalance/without counterbalance)
Symbol, parameter name Calculation formula
H, mm Opening height from 1 800 to 5 800
B, mm Opening width from 2 000 to 5 700

Complectations

Tracks and track covers made of zinc-coated steel
Tracks and track covers made of zinc-coated steel
Zinc-coated shaft, diameter 90/130 mm
Zinc-coated shaft, diameter 90/130 mm
Guide rails — extruded polyethylene
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain
Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain
Tracks and track covers made of stainless steel AISI304, AISI316
Tracks and track covers made of stainless steel AISI304, AISI316
Control unit body made of stainless steel AISI304
Control unit body made of stainless steel AISI304
Heating of the drive and tracks
Heating of the drive and tracks
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automatically with a counterweight
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automatically with a counterweight

Extra information

  • Carry out regular maintenance of high-speed doors to ensure their smooth and safe operation.
  • Manual closing and opening of the doors is carried out with a hand crank.
  • Don’t strike the door curtain or obstruct its movement.
  • Keep the rails clean.
  • Never stay or cross an opening under a moving door curtain as it may cause serious injury.
  • Keep the door opening clear of any objects during door closing or opening.
Packing in wood Packaging features
Contents bubble wrap, foam, wooden pallet, wooden bars
Length, mm depends on door parts length
Width, mm from 640 to 705
Height, mm from 480 to 730
DoorHan warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
  • All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.

New Products

DoorHan drive (220/380 V)

Other customers also looked at

Instructions

Navigation