RSD01BIW Garage Sectional Door with Extension Spring Mechanism

RSD01BIW residential sectional doors are designed for garages and technical rooms with small-sized door openings with width from 2 000 to 3 500 mm, and height from 1 800 to 3 000 mm. Low lift construction allows installation in premises with minimum headroom and side room clearance of 100 mm. In case there is no space between ceiling, walls and opening edges a built-in installation hardware is available. A wide colour range and numerous door panel designs of RSD01BIW doors make them perfectly suitable for residential dwellings. Doors optimally seal the opening – they protect against cold or hot temperature and humidity nuisance. Easily installed they are durable and have long service life.
RSD01BIW Garage Sectional Door with Extension Spring Mechanism

Application

Residential. Garages
Residential. Storerooms

Advantages

1
2

Design

M-line
M-line
S-line
S-line
L-Line
L-Line
Cassette
Cassette
V-Line
V-Line
S-line — inside
S-line — inside
Woodgrain (outside)
Woodgrain (outside)
Stucco (inside)
Stucco (inside)
RAL 9003 White
RAL 9003 White
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 7004 Signal grey
RAL 7004 Signal grey
RAL 1014 Ivory
RAL 1014 Ivory
RAL 6005 Moss green
RAL 6005 Moss green
RAL 5005 Signal blue
RAL 5005 Signal blue
RAL 7016 Anthracite grey
RAL 7016 Anthracite grey
RAL 3000 Flame red
RAL 3000 Flame red
RAL 3005 Wine red
RAL 3005 Wine red
RAL 8017 Chocolate brown
RAL 8017 Chocolate brown
RAL 8014 Sepia brown
RAL 8014 Sepia brown
Golden oak (extra charge)
Golden oak (extra charge)
Wenge (extra charge)
Wenge (extra charge)
Custom colour (extra charge)
Custom colour (extra charge)

Construct and sizes

Construction
  • 1. Steel profile with multi-chamber top seal
  • 2. Multi-chamber side seals
  • 3. Bottom steel profile with thermal break and bottom seal
  • 4. Top corner bracket
  • 5. Side support with adjustable roller holder
  • 6. Bottom corner bracket with adjustable roller holder
  • 7. Hinge
  • 8. Vertical track
  • 9. Horizontal track
  • 10. C-profile
  • 11. Sandwich panel
  • 12. Double pulley bracket
  • 13. Universal mounting bracket for horizontal tracks
  • 14. Handle
  • 15. Latch lock (optional)
  • 16. Extension springs
Parameters Value
Opening height, mm 1 800–3 000
Opening width, mm 2 000–3 500
Headroom, mm minimum 100
Sideroom clearance, mm minimum 100
Opening Dimensions

Mounting

Checking Dimensional Details
  • All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
  • H — opening height (distance from floor to opening top);
  • B — opening width (distance between left and right side of the opening);
  • h — headroom (distance between opening top and ceiling) min 100 mm;
  • b1/ b2 — left/right sideroom (distance between a corresponding opening edge and obstacle) min 100 mm;
  • L — backroom.
  • When measuring Н and В the largest figure is taken for final dimension.
  • When measuring h, b1, b2 and L the smallest figure is taken for final dimension.

Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and side rooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.

Overhead or classical mounting. All the tracks are mounted on the inner side of headroom and siderooms. Overhead or classical mounting. All the tracks are mounted on the inner side of headroom and siderooms.
Butted mounting (in case there’s no sideroom). Such mounting involves installation of tracks system on a supporting bar butted up against the opening. Arising wall unevenness is leveled with corner and pulley brackets. Supporting bar has aesthetic appearance and can be coloured white (RAL 9003) and sepia brown (RAL 8014). Butted mounting (in case there’s no sideroom). Such mounting involves installation of tracks system on a supporting bar butted up against the opening. Arising wall unevenness is leveled with corner and pulley brackets. Supporting bar has aesthetic appearance and can be coloured white (RAL 9003) and sepia brown (RAL 8014).
Overlapping built-in mounting (in case there’s no sideroom). Supporting bar is installed in the opening with 20 mm overlapping. Tracks system is mounted on the bar. Arising wall unevenness is leveled with corner and pulley brackets. Supporting bar has aesthetic appearance and can be coloured white (RAL 9003) and sepia brown (RAL 8014). Overlapping built-in mounting (in case there’s no sideroom). Supporting bar is installed in the opening with 20 mm overlapping. Tracks system is mounted on the bar. Arising wall unevenness is leveled with corner and pulley brackets. Supporting bar has aesthetic appearance and can be coloured white (RAL 9003) and sepia brown (RAL 8014).
Low lift (extension springs) Low lift (extension springs)
Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height h ≥ 100; (h ≥ 130 if door operator is used)
B, mm Opening width B
A, mm Angle track height H + 54
A1, mm Vertical track height А - 552
E, mm Horizontal track length Н + 440
S, mm Minimum side room clearance 100
P, mm Door opener position Н + 1 185
n, mm Opening overlapping 230 (without door operator); 40-60 (with door operator)

Complectations

Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.
Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.
Side tracks and vertical angles made of 1.5 mm steel have increased strength and all the necessary perforation.
Side tracks and vertical angles made of 1.5 mm steel have increased strength and all the necessary perforation.
Galvanized double extension springs («spring-in-spring» system). Door leaf balancing mechanism ensures over 25 000 operating cycles.
Galvanized double extension springs («spring-in-spring» system). Door leaf balancing mechanism ensures over 25 000 operating cycles.
Stylish, elegantly shaped handle acts as an elegant decoration of the door leaf.
Stylish, elegantly shaped handle acts as an elegant decoration of the door leaf.
Low lift guarantees easy installation in premises of almost any size.
Low lift guarantees easy installation in premises of almost any size.
A set of mounting hardware, instruction manual and product technical data.
A set of mounting hardware, instruction manual and product technical data.
Acrylic window 607 х 202, black (DH85602). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Black framing.
Acrylic window 607 х 202, black (DH85602). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Black framing.
Acrylic window 635 х 330, black, industrial (DH85603). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Black framing.
Acrylic window 635 х 330, black, industrial (DH85603). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Black framing.
Acrylic window 452 х 302, white (DH85626). Special window design guarantees tight fitting in the door leaf preventing temperature loss. White framing.
Acrylic window 452 х 302, white (DH85626). Special window design guarantees tight fitting in the door leaf preventing temperature loss. White framing.
Acrylic window 452 х 302, brown (DH85631). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Brown framing.
Acrylic window 452 х 302, brown (DH85631). Special window design guarantees tight fitting in the door leaf preventing temperature loss. Brown framing.
Acrylic window 452 х 302, white with “cross design” (DH85627) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Cross-shaped insert. White framing.
Acrylic window 452 х 302, white with “cross design” (DH85627) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Cross-shaped insert. White framing.
Acrylic window 452 х 302, brown with “cross design” (DH85628) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Cross-shaped insert. Brown framing.
Acrylic window 452 х 302, brown with “cross design” (DH85628) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Cross-shaped insert. Brown framing.
Acrylic window 452 х 302, white with “diamond design”(DH85629) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Diamond-shaped insert. White framing.
Acrylic window 452 х 302, white with “diamond design”(DH85629) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Diamond-shaped insert. White framing.
Acrylic window 452 х 302, brown with “diamond design” (DH85630) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Diamond-shaped insert. Brown framing.
Acrylic window 452 х 302, brown with “diamond design” (DH85630) decorating insert. Special window design guarantees tight fitting in the door leaf preventing temperature loss. Diamond-shaped insert. Brown framing.
Latch lock (R25135) blocks the door leaf from inside the premise. Simple and reliable.
Latch lock (R25135) blocks the door leaf from inside the premise. Simple and reliable.
T-lock blocks the door leaf both from inside and outside the premise.
T-lock blocks the door leaf both from inside and outside the premise.

Extra information

  • Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. extension springs should compensate leaf weight.
  • For opening the door in manual operation use only the door handle.
  • Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.
  • Keep people and animals clear of opening while door is operated.
  • Never stay or cross an opening under a moving door leaf as it may cause serious injury or death.
  • Don’t strike the door leaf or obstruct its movement.
  • Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door opener (if used).
  • Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.
Packing in cardboard Packaging features
Contents the door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film. Hardware is packed in a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo
Contents corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm from 500 to 800
Height, mm from 300 to 500
Length, mm from 2 100 to 3 600
Gross weight, kg up to 100
Number of items in the packaging leaf package — from 3 to 5 panels; tracks package — 1 track system; hardware — 1 box
DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.
  • Sandwich panels should be stored in producer’s packaging on a flat horizontal surface in warehouses or under a canopy for a period not exceeding 6 months from the production date. Provide proper protection from water, snow, dirt, and direct sunlight.

New Products

New bracket used to fasten C-profile has reinforced ribs and a number of grooves which make it possible to use it with different side seals. C-profile connected with the bracket forms a measuring plank which makes mounting of vertical tracks much easier.
Modernized top bracket has improved strength characteristics, larger slots, and a stopper which makes position adjustment on a door panel more precise and secure.
New built-in profile with thermal break prevents door panel from temperature (cold or hot) transfer. Bottom seal perfectly seals the opening.
New rollers have sealed bearings to prevent dust penetration and increase service life.
Special spacers are fixed to the roller shaft without dismantling roller holder to make installation easier.
Improved shape of the bracket provides secure and easy installation of horizontal tracks.

Other customers also looked at

Navigation