Window Shutters of RH45PN Foam-Filled Perforated Profile

DoorHan offers rolling shutters corresponding to International and European quality and safety standards, suitable for operation in different climatic conditions. Rolling shutters and roll-up doors are used to protect door and window openings from burglary and adverse weather conditions. All the rolling shutter components are produced on modern automated lines with the use of equipment from leading manufacturers. All metal parts are zinc-coated or painted to ensure corrosion resistance, prevent negative effects of aggressive environments, and prolong operational life of rolling shutters. Reliability of rolling shutters, safety of their operation and compliance with International standards are confirmed by corresponding certificates.
Window Shutters of RH45PN Foam-Filled Perforated Profile

Application

Window and door openings in residential buldings

Advantages

1
2

Design

RH45PN perforated foam-filled profile
RH45PN perforated foam-filled profile
White
White
Brown
Brown
Grey
Grey
Beige
Beige

Construct and sizes

Construction
  • 1. Hood side cap RK125, RK137, RSK137, RK150, RK165, RK180, RK205, RK250
  • 2. Bearing support BS100
  • 3. Entry guide device RU45
  • 4. Bearing BR28, BR42
  • 5. Universal capsule KP40, KP60, KPU60, KPU70
  • 6. Octagonal shaft RV40, RV60, RV60-1, RV70
  • 7. Security lock ring RD40, RD60, RD70
  • 8. Hood RB125, RB137, RB150, RB165, RB180, RB205, RB250
  • 9. Automatic lock RM1
  • 10. Tubular motor
  • 11. Headplate BU100K
  • 12. Guide rail RG52M, RG53BN, RG53MS, RG62BS, RG64
  • 13. Plug PB14
  • 14. End lock SL45M, SLA45
  • 15. End profile RA45EN, RA45KN
  • 16. Slat (curtain) RH45PN
  • 17. Key lock switch SWM, SWK
  • 18. Key switch SWB, SWH
Parameters Value
Opening height, mm from 500 to 5 500
Opening width, mm from 400 to 3 050
Maximum door curtain area, sqm 7
Headroom, mm from 125 (face of wall installation)
Sideroom clearance, mm from 53 (face of wall installation)
Opening Dimensions

Mounting

Checking Dimensional Details
  • Opening parameters for face of wall mounting: H — opening height (max), mm; B — opening width (max), mm; h1 — headroom (min), mm; b1 and b2 — sideroom clearance (min), mm. Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.

Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be solid, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1,5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling shutters completely cover the opening and are almost flush with the walls. Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling shutters completely cover the opening and are almost flush with the walls.
Between jambs mount, shutter hood outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises. Between jambs mount, shutter hood outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises.
Between jambs mount, shutter hood inward. The rolling shutter is installed inside the opening with the shutter hood turned inward so that the curtain is flush with the opening outside surface. Between jambs mount, shutter hood inward. The rolling shutter is installed inside the opening with the shutter hood turned inward so that the curtain is flush with the opening outside surface.
Hidden mount. Hidden mount needs a special niche to be done in the upper part of the opening. The niche is designed at the stage of building construction or renovation. The hidden method of installation allows you to place the shutters inside the opening and when opened they do not prevent the windows from opening in any direction. Hidden mount. Hidden mount needs a special niche to be done in the upper part of the opening. The niche is designed at the stage of building construction or renovation. The hidden method of installation allows you to place the shutters inside the opening and when opened they do not prevent the windows from opening in any direction.
Rolling shutters operated with strap, rope or cord crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension. Rope crank operates shutters weighing less than 20 kg. Turning the handle of the rope winder operates shutter curtain. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank. Rolling shutters operated with strap, rope or cord crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension. Rope crank operates shutters weighing less than 20 kg. Turning the handle of the rope winder operates shutter curtain. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank.
Rolling shutters operated with rod crank.  Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain. Rolling shutters operated with rod crank. Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain.
Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft. Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Complectations

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Curtain assembly. Assembly of foam-filled profiles with side locks, preventing slats from disengaging.
Curtain assembly. Assembly of foam-filled profiles with side locks, preventing slats from disengaging.
End profile with seal. End profile can be fitted with a locking mechanism.
End profile with seal. End profile can be fitted with a locking mechanism.
Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.
Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.
Manual or automatic drive.
Manual or automatic drive.
Box for the components.
Box for the components.
SWB key-switch for face of wall installation.
SWB key-switch for face of wall installation.
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.
CV01 control box for remote control of one or several rolling shutters.
CV01 control box for remote control of one or several rolling shutters.
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.
Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters.
Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters.
GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors.
GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors.
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.
Wi-Fi-module for wireless control of electric drives (control signal, NO).
Wi-Fi-module for wireless control of electric drives (control signal, NO).
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.
T5 remote transmitter can operate five rolling shutters.
T5 remote transmitter can operate five rolling shutters.
Transmitter-4 remote control operates four devices.
Transmitter-4 remote control operates four devices.
Transmitter-4PRO-Black remote control operates four automatic devices.
Transmitter-4PRO-Black remote control operates four automatic devices.
Photocell-N safety photocells consisting of infrared transmitter and receiver.
Photocell-N safety photocells consisting of infrared transmitter and receiver.

Extra information

  • Correct installation and operation of rolling shutters guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:
  • Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.
  • Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.
  • Rolling shutters should open smoothly without jolts or jamming.
  • Use only specified equipment for opening and closing of the shutters.
  • Don’t exert pressure exceeding 100 N when opening the rolling shutters.
  • Partial opening or closing of the shutters, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.
  • If the rolling shutter is equipped with a mechanical lock or a latch lock unlock it before opening the shutters.
  • If rolling shutters are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling shutters. If the operated rolling shutter is large use emergency manual drive only for closing.
  • Follow the corresponding operation and installation instructions when using an electric motor.
  • Do NOT permit children to play on, near the operating area, or with the rolling shutters or to operate controls.
  • Keep door/window opening clear of people and animals while operating the shutters.
  • Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.
  • Don’t strike the shutter curtain or obstruct its movement.
  • Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.
  • Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).
  • In winter, in case of ice coating of rolling shutter parts, it’s necessary to pre-tap the shutter curtain perimeter to release it of ice before operating the shutters. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).
  • Carry out rolling shutter maintenance at least once a year.
  • Should the rolling shutters be used for other purposes or should their size exceeds the recommended one, the manufacturer holds no responsibility for their integrity and correct operation.
  • Adjustments or repairs must be made by a trained technician using proper tools and instructions.
Packing in cardboard Packaging features
Contents The packaging comprises bubble wrap and white double wall corrugated cardboard; the hood with rolled in shutter curtain is wrapped in bubble wrap and than in cardboard sheet. This box is than double wrapped in stretch film and fixed with adhesive tape with DoorHan logo.
Width, mm from 137 to 250
Height, mm from 137 to 250
Length, mm from 500 to 6 000
DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.
  • Use roll-up doors/rolling shutters made of RH77 or RHE84 profile only for installation in entrance, garage or drive-through openings and in regions with high wind load.

New Products

New spring loaded mechanism 4ROL03/8. Shorter spring used in this mechanism allows reducing rolling shutters width to 400 mm.
New steel side caps RS137 and RSK300, made of zinc-coated steel, ensure high rigidity and corrosion resistance, and are painted the same colour as the shutter hood.
Reinforced guide rail RG62BS.
Safe packaging in white double wall corrugated cardboard box.
New end profile of RA45KN015 series is made in black and is more economical compared to RA45EN end profile.

Other customers also looked at

Navigation