Rolling Doors of RH77M Foam-Filled Profile

DoorHan offers rolling shutters corresponding to International and European quality and safety standards, suitable for operation in different climatic conditions. Rolling shutters and roll-up doors are used to protect door and window openings from burglary and adverse weather conditions. All the rolling shutter components are produced on modern automated lines with the use of equipment from leading manufacturers. All metal parts are zinc-coated or painted to ensure corrosion resistance, prevent negative effects of aggressive environments, and prolong operational life of rolling shutters. Reliability of rolling shutters, safety of their operation and compliance with International standards are confirmed by corresponding certificates.
Rolling Doors of RH77M Foam-Filled Profile

Application

Entrance and garage openings in residential and commercial premises

Advantages

1
2

Design

RH77M perforated foam-filled profile
RH77M perforated foam-filled profile
White
White
Brown
Brown
Grey
Grey
Beige
Beige
Green
Green
Blue
Blue
Maroon
Maroon
Silver
Silver
Golden oak
Golden oak
RAL 7016 Anthracite grey
RAL 7016 Anthracite grey

Construct and sizes

Construction
  • 1. Hood side cap RK250S, RK300, RSK300, RK375
  • 2. Bearing support BS100, BS42
  • 3a. Guiding roller RU77 (RV77)
  • 4. Bearing BR28, BR42
  • 5. Universal capsule KP60, KPU60, KPU70, KPU70S, KPU102
  • 6. Octagonal shaft RV60, RV70, RV102
  • 7. Security lock ring RD60, RD70
  • 8. Hood RB250, RB300, RB375
  • 9. Automatic lock RB4
  • 10. Tubular motor
  • 11. Headplate BU100K
  • 12. Guide rail RG83MS, RG90E, RG90MS, RG100
  • 13. Plug PB14
  • 14. End lock SL77
  • 15. End profile RA77EM, RA77KN, RA70E
  • 16. Slat (curtain) RH77M
  • 17. Key lock switch SWM, SWK
  • 18. Key switch SWB, SWH
Parameters Value
Opening height, mm from 1 000 to 4 500
Opening width, mm from 1 000 to 5 200
Maximum door curtain area, sqm 18
Headroom, mm from 250 (face of wall installation)
Sideroom clearance, mm from 83 (face of wall installation)
Opening Dimensions

Mounting

Checking Dimensional Details
  • Opening parameters for face of wall mounting: H — opening height (max), mm; B — opening width (max), mm; h1 — headroom (min), mm; b1 and b2 — sideroom clearance (min), mm. Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.

Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be solid, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1,5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling doors completely cover the opening and are almost flush with the walls. Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling doors completely cover the opening and are almost flush with the walls.
Between jambs mount, shutter hood outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises. Between jambs mount, shutter hood outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises.
Between jambs mount, shutter hood inward. The rolling shutter is installed inside the opening with the shutter hood turned inward so that the curtain is flush with the opening outside surface. Between jambs mount, shutter hood inward. The rolling shutter is installed inside the opening with the shutter hood turned inward so that the curtain is flush with the opening outside surface.
Rolling doors operated with cord crank. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank. Rolling doors operated with cord crank. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank.
Rolling doors doors operated with rod crank.  Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain. Rolling doors doors operated with rod crank. Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain.
Rolling doors with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft. Rolling doors with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Complectations

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Curtain assembly. Assembly of steel profiles with side locks, preventing slats from disengaging.
Curtain assembly. Assembly of steel profiles with side locks, preventing slats from disengaging.
End profile with seal. End profile can be fitted with a locking mechanism.
End profile with seal. End profile can be fitted with a locking mechanism.
Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.
Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.
Manual or automatic drive.
Manual or automatic drive.
Box for the components.
Box for the components.
SWB key-switch for face of wall installation.
SWB key-switch for face of wall installation.
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.
CV01 control box for remote control of one or several rolling shutters.
CV01 control box for remote control of one or several rolling shutters.
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.
Wi-Fi-module for wireless control of electric drives (control signal, NO).
Wi-Fi-module for wireless control of electric drives (control signal, NO).
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.
Transmitter-4 remote control operates four devices.
Transmitter-4 remote control operates four devices.
Transmitter-4PRO-Black remote control operates four automatic devices.
Transmitter-4PRO-Black remote control operates four automatic devices.
Photocell-N safety photocells consisting of infrared transmitter and receiver.
Photocell-N safety photocells consisting of infrared transmitter and receiver.
Lamp-PRO-series LED lamp with antenna.
Lamp-PRO-series LED lamp with antenna.

Extra information

  • Correct installation and operation of rolling doors guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:
  • Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.
  • Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.
  • Rolling doors should open smoothly without jolts or jamming.
  • Use only specified equipment for opening and closing of the doors.
  • Don’t exert pressure exceeding 100 N when opening the rolling doors.
  • Partial opening or closing of the doors, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.
  • If the rolling door is equipped with a mechanical lock or a latch lock unlock it before opening the doors.
  • If rolling doors are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling doors. If the operated rolling door is large use emergency manual drive only for closing.
  • Follow the corresponding operation and installation instructions when using an electric motor.
  • Do NOT permit children to play on, near the operating area, or with the rolling doors or to operate controls.
  • Keep door/window opening clear of people and animals while operating the shutters.
  • Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.
  • Don’t strike the shutter curtain or obstruct its movement.
  • Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.
  • Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).
  • In winter, in case of ice coating of rolling door parts, it’s necessary to pre-tap the door curtain perimeter to release it of ice before operating the door. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).
  • Carry out rolling door maintenance at least once a year.
  • Should the rolling door be used for other purposes or should its size exceed the recommended one, the manufacturer holds no responsibility for its integrity and correct operation.
  • Adjustments or repairs must be made by a trained technician using proper tools and instructions.
Packing in cardboard Packaging features
Contents The packaging comprises bubble wrap and white double wall corrugated cardboard; the hood with rolled in shutter curtain is wrapped in bubble wrap and than in cardboard sheet. This box is than double wrapped in stretch film and fixed with adhesive tape with DoorHan logo.
Height, mm from 250 to 375
Width, mm from 250 to 375
Length, mm from 1 000 to 6 000
DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.
  • Foam-filled slat profile can be combined with the fenestrated profile of RHE78G series.

New Products

New steel side caps RS137 and RSK300, made of zinc-coated steel, ensure high rigidity and corrosion resistance, and are painted the same colour as the shutter hood.
Reinforced guide rail.
Safe packaging in white double wall corrugated cardboard box.

Other customers also looked at

Navigation