Rolling Shutters of RHS22 Steel Profile

DoorHan offers roller shutters corresponding to International and European quality and safety standards, suitable for operation in different climatic conditions. Roller shutters and roll-up doors are used to protect door and window openings from burglary and adverse weather conditions. All the roller shutter components are produced on modern automated lines with the use of equipment from leading manufacturers. All metal parts are zinc-coated or painted to ensure corrosion resistance, prevent negative effects of aggressive environments, and prolong operational life of roller shutters. Reliability of roller shutters, safety of their operation and compliance with International standards are confirmed by corresponding certificates.
Roller Shutters of RHS22 Steel Profile

Application

Small window and technical openings

Advantages

1
2

Design

RHS22 steel profile
RHS22 steel profile
White
White
Brown
Brown

Construct and sizes

Construction
  • 1. Hood side cap RK125, RK137, RK150
  • 2. Bearing support BS100
  • 3. Entry guide device RU22
  • 4. Bearing BR28
  • 5. Universal capsule KP40
  • 6. Octagonal shaft RV40
  • 7. Security lock ring RD40
  • 8. Hood RB125, RB137, RB150
  • 9. Security spring RS90
  • 10. Tubular motor
  • 11. Headplate BU100
  • 12. Guide rail RG46M, RG52M, RG53MS
  • 13. Plug PB14
  • 14. End lock RP40
  • 15. End profile RA42E
  • 16. Slat (curtain) RHS22
  • 17. Key lock switch SWM, SWK
  • 18. Key switch SWB, SWH
Parameters Value
Opening height, mm from 500 to 2 500
Opening width, mm from 400 to 1 400
Maximum door curtain area, sqm 2.7
Headroom, mm from 125 (face of wall installation)
Sideroom clearance, mm from 46 (face of wall installation)
Opening Dimensions

Mounting

Checking Dimensional Details
  • Opening parameters for overhead mounting: H — opening height (max), mm B — opening width (max), mm h1 — headroom (min), mm b1 and b2 — sideroom clearance (min), mm Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.

Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be solid, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1,5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening with the guide rails — on either side of the opening. Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening with the guide rails — on either side of the opening.
Between jambs mount, shutter box outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises. Between jambs mount, shutter box outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises.
Between jambs mount, shutter box inward. The rolling shutter is installed inside the opening with the shutter box turned inward so that the curtain is flush with the opening outside surface. Between jambs mount, shutter box inward. The rolling shutter is installed inside the opening with the shutter box turned inward so that the curtain is flush with the opening outside surface.
Rolling shutters operated with strap, rope crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension. Rolling shutters operated with strap, rope crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension.
Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft. Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Complectations

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.
Curtain assembly. Assembly of steel profiles with side locks.
Curtain assembly. Assembly of steel profiles with side locks.
End profile with seal. End profile can be fitted with a locking mechanism.
End profile with seal. End profile can be fitted with a locking mechanism.
Guide rails with seals.
Guide rails with seals.
Manual or automatic drive.
Manual or automatic drive.
Box for the components.
Box for the components.
SWB key-switch for face of wall installation
SWB key-switch for face of wall installation
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft
SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft
CV01 control box for remote control of one or several roller shutters
CV01 control box for remote control of one or several roller shutters
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters
SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters
Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters
Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters
GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors
GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control
External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control
Wi-Fi-module for wireless control of electric drives (control signal, NO)
Wi-Fi-module for wireless control of electric drives (control signal, NO)
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive
GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive
T5 remote transmitter can operate five roller shutters
T5 remote transmitter can operate five roller shutters
Transmitter-4 remote control operates four devices
Transmitter-4 remote control operates four devices
Transmitter-4PRO-Black remote control operates four automatic devices
Transmitter-4PRO-Black remote control operates four automatic devices
Photocell-N safety photocells consisting of infrared transmitter and receiver
Photocell-N safety photocells consisting of infrared transmitter and receiver

Extra information

  • Correct installation and operation of rolling shutters guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:
  • Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.
  • Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.
  • Rolling shutters should open smoothly without jolts or jamming.
  • Use only specified equipment for opening and closing of the shutters.
  • Don’t exert pressure exceeding 100 N when opening the rolling shutters.
  • Partial opening or closing of the shutters, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.
  • If roller shutter is equipped with a mechanical lock or a latch lock unlock it before opening the shutters.
  • If roller shutters are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling shutters. If the operated rolling shutter is large use emergency manual drive only for closing.
  • Follow the corresponding operation and installation instructions when using an electric motor.
  • Do NOT permit children to play on, near the operating area, or with the rolling shutters or to operate controls.
  • Keep door/window opening clear of people and animals while operating the shutters.
  • Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.
  • Don’t strike the shutter curtain or obstruct its movement.
  • Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.
  • Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be be a communication describing the arisen problem which can be documented).
  • In winter, in case of ice coating of rolling shutter parts, it’s necessary to pre-tap the shutter curtain perimeter to release it of ice before operating the shutters. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).
  • Carry out rolling shutter maintenance at least once a year.
  • Should the rolling shutters be used for other purposes or should their size exceeds the recommended one, the manufacturer holds no responsibility for their integrity and correct operation.
  • Adjustments or repairs must be made by a trained technician using proper tools and instructions.
Packing in cardboard Packaging features
Contents The packaging comprises bubble wrap and white double wall corrugated cardboard; the hood with rolled in shutter curtain is wrapped in bubble wrap and than in cardboard sheet. This box is than double wrapped in stretch film and fixed with adhesive tape with DoorHan logo.
Height, mm from 137 to 150
Width, mm from 137 to 150
Length, mm from 500 to 3 500
DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.
  • Use roll-up doors/rolling shutters made of RH77 or RHE84 profile only for installation in entrance, garage or drive-through openings and in regions with high wind load.

New Products

Safe packaging in white double wall corrugated cardboard boxes

Other customers also looked at

Navigation